How to choose industrial chiller

April 02, 2021

The domestic vertical and horizontal injection molding machines are used under normal ambient temperature conditions, and the cooling water condensation temperature of the water-cooled chiller is below 35 degrees (the air-cooled chiller condensing temperature is below 43 degrees).

(: Yang Huijuan /)

A: * Ways:

1hp water-cooled chiller can be equipped with 80 tons of clamping force injection molding machine temperature control at 5-10 degrees;

1hp water-cooled chiller can be equipped with 100 tons of clamping force injection molding machine temperature control at 10-15 degrees;

1hp water-cooled chiller can be equipped with 120 tons of clamping force injection molding machine temperature control at 15-20 degrees;

(The matching of the air-cooled chiller is 0.8 times that of the water-cooled chiller, that is, the temperature of the 1HP air-cooled chiller can be matched with 64 tons of clamping force. The temperature of the injection molding machine is controlled at 5-10 degrees.)

B: The second way:

1HP water-cooled chiller can be equipped with a single injection volume of 10 QZ injection molding machine temperature control at 5-10 degrees.

Injection quantity 1QZ=28.5g

The above formula is the result of the thoughts. In addition to the above formula, the salesman should filter the actual situation and choose the appropriate chiller.

C: matching of the chiller and the cooling tower,

According to the actual actual 1HP chiller, a 1.2 ton cooling tower can take away the heat generated by the chiller.

Sebelumnya

Berikutnya

Hubungi kami

Author:

Mr. Richard Lee

Phone/WhatsApp:

+8613605314726

Produk populer